Home > Product > Power Supplies > HPC-430-N12S (APFC)   (Discontinued)
New version with greater efficiency and longer cables

550W upgrade version - Available



 

Supports
Multi-core
Processor
Systems












Standard ATX dimensions: 150(W) x 85(H) x 140(D) mm


 





HIGH POWER® HPC-430-N12S is a reliable TUV safety power supply that fits and works in most name brand mini tower, custom mid tower PC, and DVR systems.      This new APFC (Active PFC) version is a more efficient design that  generates less heat and provides stronger dual 12V output rails than previous generation of ATX 12V 2.0 power supply unit.  The over-sized low-noise 120mm fan thus can operate at its lowest noise operating range from 800 to 1800 RPM.

The power supply fan speed is regulated in reference to its internal temperature sensor attached to an internal heat-sink fin.  Our special low-friction fan starts leisurely at 800 RPM, reducing power consumption and greatly reducing fan noise.   On board smart controller may increase the fan speed in response to rise in temperature.

In addition to running with less noise and saves you on electrical bill over older models, HPC-430-N12S meets all major standard safety and environmental standards.   It is an ideal solid power supply choice for new gaming system, server, POS station, or upgrade for important legacy PC station.


  • Active PFC technology for greater energy efficiency
  • EuP Lot 6 2013 compliant
  • Consumes less than 0.5W in standby no load state
  • Worldwide application with automatic AC input selection
  • 430-watt continuous / 500-watt peak
  • Dual +12v rails with combined 360-watt output capacity
  • Extra long cable with high current capacity for server & industrial application
  • Right-Angle Serial-ATA connector for extra short clearance application
  • Fan Speed Controller built-in to automatically spin down the fan to reduce fan noise and extend fan life under low load
  • Special Fan Speed Monitor connector to allow system to monitor cooling fan RPM status in real-time
  • Meets Intel ATX12V 2.2  specification
  • Flexible connector design supporting both ATX and BTX systems. 
  • Supports Intel Core i3, i5, i7, 64-bit Pentium D, Core 2 Quad, Core 2 Duo, Core 2 Extreme, and AMD 64 X2, FX-6300, FX-83XX, A10, A6 based systems.
  • Ultra low noise performance without the high cost of fanless model
  • Honey-comb rear vent structure for improved ventilation
  • Complete 4*Startm system protection with built-in: Over Voltage Protection, Under Voltage Protection, Short Circuit Protection, Over Power Protection
  • RoHS Compliant - made with lead-free and hazardous-free components
  • Rocker switch for manual shut-down
  • High standard of quality with FCC, CE, TUV, and TUVus certification 

















Power Connectors Summary

This version has longer cables and more connectors than the standard version  (stated cable length accuracy is +- 10mm)

1x 20+4 Main (cable length: 520mm)
1x 4+4 ATX 12V (cable length: 520mm)
1x 6+2 PCI-E (cable length: 500mm)
4x Right-Angle SATA (cable length: 420mm, 570mm)
4x Molex Peripheral (cable length: 420mm, 570mm, 720mm)
1x Floppy  (cable length: 720mm)
1x 3-pin Fan Speed Monitor (cable length: 500mm)


       





Question: What's Fan Speed Monitor?

Answer: The 3-pin Fan Speed Monitor connector, when connected to an available fan port on the motherboard, provides real time rotational speed of the power supply fan to the system.  This feature provides an added level of security alarm to the system.  In the event that the power supply's fan failure, the system can now be programmed to shut down immediately or sound an alarm.  Most motherboard has at least one extra 3-pin fan connector port in addition to the standard CPU fan connector.  Fan Speed Monitor connector does not have to be connected to the motherboard in order for the power supply fan to work.  This power supply has a fan speed controller with built-in temperature sensor. 





Ultra Low Noise
Fanless-quiet with high tech low heat design sufficiently cooled by a low-RPM 120mm fan.  Fan speed is thermostatically controlled.




EuP Lot 6 2013 compliant


This unit is designed to consumes less than 0.5 watt in standby no load state.  You no longer suffer noticeable power loss even after PC system is powered off.



Right angle (90-degree) serial ATA power connectors spread out in multiple lines of cables to reach various drive positions in tight corner







RoHS Compliant - made with hazardous-free components

RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.
Lead-FREE    Cadium-FREE    Mercury-FREE    Hexavalent Chromium-FREE  
PBB-FREE    PBDE Flame Retardants-FREE


Performance and Low Noise Upgrade for:

Dell XPS Studio 9000 400 410 435 MT
Dell Dimension 3100, E310, 5100, E510, 5150, E520, E521, 9100, 9150, 9200
Dell Optiplex Mini Tower
320 330 360 GX620 740 745 745c 780 790 MT
Dell Precision T3400 380 390 Workstation
Dell power supply models (
DP/N):
C5201,  F217J, H305N-00, K8956, KH624, L305N-00, MC633, N305P-05 NPS-305HB A, N8372, NC905, PS-6311-2D2, PS-6371-1DF2-LF, PC357, P8401, PH333, PH344, W8185, WM283, M8806, HP-P3067F3P, H305P-00, N230N-00, NPS-230DB-1 A,  N255PD-00, NPS-255BB A, 0N804F, H255PD-00, N805F, HP-D2555P0 01LF, 0D3D1C, 0N805F, L265EM-00, D3D1C,
PS-6271-01DA


Gateway part number: 102015, 102544 , 6500936, 6500914, 102839

HP Pavilion Home PC a1591kr, a1581kr, a1510kr, a1253w, a1217n, a1520kr, a1550kr, a1570kr, a1581kl, a1591kl
HP Media Center PC m7170n, m7183c, m7260n, m7277c, m7287c, m7288hk, m7550kr, m7557c, m7567c, m7570n, m7550la, M9177C-B, M8307C-B
HP p/n: 5188-2533 5188-0127

PELCO Hybrid DVR such as DX8100 Series , DX8108 Series ...


Bestec ATX-250-12Z, ATX-250-12E, ATX-250-12ZD, ATX-300-12E  ATX-300-12EB3

Chieftec/HIGH POWER® HPC-360-102DF,
HPC-360-302DF, HPC-420-102DF, HPC-420-302DF
Flextronics VP-09500073-000 
FSP FSP300-60GI, FSP235-60GI
HIPRO HP-235ATXA6 HP-D2537F3R








TECHNICAL SPECIFICATION



Cable Design Details








Output Power Distribution Table



    AC INPUT
    100~240Vac - 60/50Hz
    DC OUTPUT
    +3.3V
    +5V
    +12V1
    +12V2
    -12V
    +5VSB
    430W
    Max
    Combined
    Watts
    20A
    20A
    17A
    15A
    0.4A
    2.5A
    430W
+5V & 3.3V combined output maximum is 130W
+12V1 & +12V2 combined output maximum is 360W


Inrush current regulation: 100A @ 230Vrms (at 25 ambient cold start).





Under-Voltage

Protection

Short-Circuit

Protection

Over-Power

Protection

  
     Operating temperature:  0 - 40 degree C

     Storage temperature: -20 - 60 degree C
   
     Humidity : Operating -  10 to 90 %, none-condensing;  Storage - 5 to 95 %

     Altitude :  Operating - From sea level to 10,000 feet; Storage - 50,000 feet

     MTBF : > 30,000 hours at full load under 25 degree C ambient condition

     High standard of quality with FCC, CE, TUV, and TUVus certification

     Standard ATX Dimensions: 150(W) x 85(H) x 140(D) mm





Output Ripple Regulation:

Parameter

Ripple & Noise

Unit

+3.3V

50

mVp-p

+5V

50

mVp-p

+12V1

120

mVp-p

+12V2

120

mVp-p

-12V

120

mVp-p

+5VSB

50

mVp-p








Model Relationship: Original HPC-430-N12S version with lower efficiency and shorter cable
550W upgrade version - Available





This web site is powered by
100% wind energy

UPC# 0897101000110




HIGH POWER® is committed to quality & long-life availability

         Copyright © 2016-2022  HIGH POWER® All rights reserved.