HIGH POWER® HPA-601250U3 REV:C0-A42

Home > Product > Power Supplies > AC/DC Adapter > HPA-601250U3 C0-A42 2.5/5.5mm

CEC Efficiency Level: IV

HIGH POWER^® HPA-601250U3 REV: C0-A42 2.5/5.5mm

60W Energy-efficient Fanless AC to 12V Power Adapter

Input: 100-240 VAC +/- 10% full range
Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong computer power cord.
Output Voltage: 12V DC
Ratings: 5A (60W)
Standby idle no load power consumption is less than 0.5 Watt
High efficiency switching technology with 83% efficency
DC Cable length - 47.5" (120cm)
DC Jack Type: barrel 2.5/5.5mm
High efficiency switching technology with 83% efficency at full load
Fanless AC adapter operates in total silence. Ideal power source for devices such as DVR, LCD monitor, etc.
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK

Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE

RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

Applications:

Security device such as LCD monitor, mini ITX system, etc.

Specifications:

Universal input 100-240 VAC
High efficiency switching technology -- 83% typical @ full load
Single 12V output @ 5A +- 5%
Load Regulation: +- 5% (11.4V - 12.6V)
DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable
Over Current protection
Over Voltage protection
Short circuit protection
Open-Circuit Protection
100% HI-POT tested
100% cycling BURN-IN
Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H)
Storage Environment:

Temperature: -20 - 85 degree C

Humidity: 5 - 90 %

Altitude: From sea level to 40,000Ft

Operating Environment:

Temperature: 0 - 40 degree C

Humidity: 10 - 90 %

Altitude: From sea level to 10,000Ft
MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions
Input Fuse Rating: T3.15A/250V
Inrush Current at cold start, maximum load:

30A at 110 VAC
60A at 220 VAC
Line Regulation: This line regulation is less than ± 1%, @ full load .
Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC
No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz
DC Output Ripple/Noise: 2% max
Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit
Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit
Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE, FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK

Built-in power status indicator

Green LED turns steady on when there is a reliable 12V DC output.

LED flashes when there is a problem found by the internal detection circuitry.

LED turns off when there is no power output or no power input.

click on picture to enlarge

Download this product literature in PDF

IRdrive Online Store

USA & Worldwide
(Fulfilled by J.D.Research, Inc.)

USD $45

1-Year Express Replacement Advantage Warranty
- Repair or Replace in 3-business Days -

This web site is powered by
100% wind energy

HIGH POWER^®is committed to quality & longevity

Copyright © 2021 HIGH POWER^® All rights reserved.