HIGH POWER ® Features

Home > Product > Standard Features

HIGH POWER^®True Wattage Rating is the industry's most reputable way of designating a power supply model's wattage capacity. It is based on the total DC output wattages that a power supply can continuously provide for the system.

Wide AC Range Line Regulation feature is standard on all models

Stable DC output voltage on all rails is consistently maintained even when AC voltage level is reduced during the hotest days and nights. Do you know that many utility companies often have to reduce AC voltage to compensate for high electrical demand ?

Automatic Fan Speed Control (AFC^TM) feature is standard on all models

The power supply fan speed is regulated in reference to its internal temperature sensor. Our special low-friction fan turns slowly at low temperatures, reducing power consumption and greatly reducing fan noise. Conversely, the fan is allowed to spin up its speed in response to temperature increase. The fan speed ranges roughly from 700 RPM to a full speed of 2800 RPM.

The AFC^TM feature, in general, extends fan life, cuts down energy consumption, and reduce the chance of over-heating. AFC^TM is one step above the basic low friction "Noise Killer" fan deployment.

Noise Report

The above report is based on a HPC-300-102 operating under 24 degree C ambiant
temperature. We tested the noise level 100cm away from the power supply, simulating
a normal usage environment.

Input Protection Protecting Your System:
Triple Protection Protecting Your System:

OVER-VOLTAGE PROTECTION
The +5V/+12V/+3.3V DC output are protected against the over voltage condition. Maximum value can't be over 6.8V at 5V terminal, 15.6V at 12V and 4.5V at 3.3V.
OVER-POWER PROTECTION
The power supply can be used electronic circuit to limit the output current against exceeding 60% of surge output or protected against excessive delivery since short circuit of any output or over total power at nominal line.
SHORT-CIRCUIT PROTECTION
Short ciecuit placed on any DC output will shut down all DC outputs and latch Standby power will be auto recovery.

High voltage spike testing on every HIGH POWER^®unit: Each unit is verfied for safety by going through a thorough HI-POT test. For example, 1,500 Volt AC spike is introduced at each HIGH POWER^® power supply for up to 60 seconds under 10mA.

Safety Certifications:

High standard of quality with TUV, cTUVus,

CE, and FCC certifications. Most models are also approved by

UL, cUL, S, N, FI, D, and CB.

Efficiency:

All HIGH POWER^® models provide an efficiency of 65% minimum when measured at full load under 115V/60Hz and 230V/50Hz condition. Most model's average operating efficiency is between 70% to 80%. We have a full line of 80 Plus® Certified Models that are over 80% efficient.

Tier one manufacturing process -- constantly improving for over 10 years.

For example, all units are burned in for over 4 hours in a 45 ^oC to 50 ^oC (105 ^oF to 122 ^oF) environment and then individually tested to our specifications and all safety related standards.

QUALITY ASSURANCE PLAN

Proactive testing and monitoring of compatibility with major motherboard manufacturers such as:

ASRock
ASUS
Gigabyte
Intel
MSI
SCE USA
Shuttle
SOYO

Compatibility is a top priority at HIGH POWER^®, along with quality.

HIGH POWER^®equipped systems are both stable and energy efficient.

This web site is powered by
100% wind energy

HIGH POWER^®is a nVIDIA^®SLI^TM Certified Partner