Supports all ATX 2.01, ATX 2.03 & Intel P4 (12V) PFC systems

Home > Product > Power Supplies > HPC-360-202 (PFC) - discontinued


360 Watts output PFC power supply.
Passed Intel Pentium 4 power supply testing.
PCI-Express video card support (optional)
I/O Switch for manual shut-down.
High quality ball bearing fan.
Automatic Fan Speed Control (A.F.C.).
Extra long cables to support server (full) tower cases.
Fan Speed Monitor connector (3-pin).
Built-in Quad Protection.

Optional PCI-E/SATA version
demo/open box units available -  USD$ 44.00
Specification | Connectors Summary | Close-up Pictures | Cable's Length


Specification
Intel Pentium 4 Ready.
Works with any Pentium III processor based system.
Works with any Celeron processor based system.
Recommended for AthlonTM XP systems.
Recommended for AthlonTM/Thunderbird systems.
Recommended for DuronTM systems.



360 Watts
maximum load
 
 
 
Output
Voltage		 Load Range
MAX		 Regulation Ripple
Peak-to-Peak
Max.
1. +5V 35.0A +5% ~ -5% 50 mV
2. +12V 17.0A +5% ~ -5% 120 mV
3. -5V 0.8A +10% ~ -10% 100 mV
4. -12V 0.3A +10% ~ -10% 120 mV
5. +5VSB 2.0A +5% ~ -5% 50 mV
6. +3.3V 28.0A +5% ~ -5% 50 mV
*+5V +3.3V combined output should not exceed 220W

MTBF Life Expectancy of this model:
100,000 hours* (11 years & 2 months)

Operating temperature range:
10oC - 50oC (50oF - 122oF)
 

High standard of quality with FCC, UL, CSA, CE, TUV, SEMKO, NEMKO, FIMKO, DEMKO, and CB certification.


 
 



Connectors Summary


Connector NameQuantityPicture
20-pin Standard ATX connector1
Peripheral Power Connector6
4-pin ATX12V Power Connector1
Connector NameQuantityPicture
Floppy Drive Power Connector2

Serial ATA Power Connector (optional)

2
PCI Express Power Connector (optional)1


6-pin Aux Power Connector (available on the standard version only)


1
3-pin Fan Speed Monitor

1



Question: What's Fan Speed Monitor?

Answer: The Fan Speed Monitor connector, when connected to an available fan port on the motherboard, provides real time rotational speed of the power supply fan to the system.  This feature provides an added level of security alarm to the system.  In the event that the power supply's fan failure, the system can now be programmed to shut down immediately or sound an alarm.  Most motherboard has at least one extra 3-pin fan connector port in addition to the standard CPU fan connector.  Fan Speed Monitor connector does not have to be connected to the motherboard in order for the power supply fan to work.  This power supply has a fan speed controller with built-in temperature sensor. 


Close-up Pictures





Cable's Length
1X 20-pin Standard ATX connector to fit any ATX mainboard.
             optional: 20+4 connector to support 20pin or 24pin board.
2X Peripheral Power Connector.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
2X Peripheral Power Connector.
1X Floppy Drive Power Connector.
1X 6-pin Aux Power Connector.  (not available on the optional version)
1X 4-pin ATX12V Power Connector.
1X 3-pin Fan Speed Monitor.
             
|<----- 18 inch --> |<-------  6.5 inch -------> |

2X SATA Power Connector. (optional)

|<-------  18.5 inch ---------------------------> |

1X PCI Express Power Connector (optional)






Optional PCI-E/SATA version
demo/open box units available -  USD$ 44.00
Model Relationship: Standard none-PFC version is HPC-360-102
Dual-Fan version is HPC-360-202 DF
Dual-Fan Active PFC version is HPC-360-302 DF


This web site is powered by
100% wind energy





HIGH POWER®  is committed to quality & longevity
         Copyright © 2004-2018 HIGH POWER® All rights reserved.